Where to Find What After Installation
FRITZ!X USB – 3 Software Installation
31
3.10 Where to Find What After Installation
After installation with default settings you will find the
software components of FRITZ!X USB at the following
locations:
The driver software for the PBX FRITZ!X USB is loaded
automatically when Windows is started. The Windows
“Start” menu now includes a program group “AVM” under
“Programs” which contains the following entries:
z
“AVM Internet Home Page” is a link to AVM’s web site
(requires web browser and Internet connection).
z
The FRITZ!X configuration program.
z
“FRITZ!X USB Readme” contains the latest information
about the product.
z
The “FRITZ!X USB Setup” program can be used to
permanently activate or deactivate data compression
with CAPI SoftCompression X75/X42.
In Windows XP and Windows 2000, the “AVM” program
group is not created in the “Start / (All) Programs” menu
unless “FRITZ!X” is installed. Then only the entry FRITZ!X
appears in the program group.
The FRITZ! modules are contained in the “FRITZ! ISDN and
Internet” icon on the Windows desktop as well as in the
“FRITZ!” program group. For information on features and
operation of the FRITZ! modules, see the chapter “FRITZ!:
Internet and ISDN Software” from page 36 and the FRITZ!
manual available in PDF format on the installation CD.
The AVM ISDN CAPI Port Driver installation creates new
entries under “Modems” in the Windows Control Panel. You
can use these virtual modems in Dial-Up Networking to
connect to your Internet Service Provider (ISP), for example,
or in other data communication programs. A shortcut to the
Online help file for the AVM ISDN CAPI Port Driver is created
on the desktop.
F!XUSB-e.book Seite 31 Mittwoch, 8. November 2006 2:23 14
