Installing the Driver Software in Windows 98
26
FRITZ!X USB – 3 Software Installation
4.
In the next dialog, select “Update” and confirm by
clicking “Continue”.
5.
At this point Windows may warn you that the “digital
signature” for the FRITZ!X USB PBX was not found. Click
“Yes” to continue the installation.
6.
A second message then informs you that no digital
signature was found for the AVM ISDN NDIS WAN CAPI
Driver. Again, click “Yes” to continue.
7.
The next dialog informs you that the drivers have been
updated successfully. Click “Finish” to close the
installation program.
This concludes the installation of the FRITZ!X USB. It is
now ready for immediate operation.
Once the driver software installation has been completed, a
message appears announcing that the FRITZ! communications
software can be installed. For more information, read
“Installing the Communications Software FRITZ!” on page 28.
3.5 Installing the Driver Software in
Windows 98
Windows 98 includes an “ISDN Configuration Wizard”. This
Wizard cannot be used to install ISDN hardware and
software correctly, nor to set up an ISDN connection. It can
only be used to configure an NDIS WAN CAPI driver already
installed.
Proceed as follows to install FRITZ!X USB:
1.
After connecting FRITZ!X USB, start the computer and
insert the FRITZ!X USB CD.
The Windows 98 Plug & Play mechanism automatically
detects the PBX. The Add New Hardware Wizard is
started.
2.
When asked: “What do you want Windows to do?”,
select the option “Search for the best driver for your
device. (Recommended).”
F!XUSB-e.book Seite 26 Mittwoch, 8. November 2006 2:23 14
