AVM FRITZ!Card PnP, Руководство пользователя

Страница: 22 / 32

3 How to Install FRITZ!Card PnP – Windows 3.x
22
3.3 Installation in Windows 3.x
You can install F
FF
FF R
R
R R RITZ!Car
ITZ!Car
ITZ!Car ITZ!Car ITZ!Card PnP
d PnP
d PnP d PnP d PnP with the aid of the introduction
contained on the CD. This introduction guides you through the
installation procedure with information and instructions. Start the
CD introduction by going into the File Manager and double-click-
ing on the file INTRO.HLP in the root directory of the F
FF FF R R R R RITZ!Car ITZ!Car ITZ!Car ITZ!Car ITZ!Card d d d d
CD.
F FF FF R R R R RITZ!Car ITZ!Car ITZ!Car ITZ!Car ITZ!Card PnP d PnP d PnP d PnP d PnP is installed on your computer by means of a
simple installation program. Installation is performed in three main
steps:
1. 1.
1. 1. 1. Physical installation of F
FF
FFR
R
R R RITZ!Car
ITZ!Car
ITZ!Car ITZ!Car ITZ!Card PnP
d PnP
d PnP d PnP d PnP in your computer.
2. 2.
2. 2. 2. Connection of F
FF
FFR
R
R R RITZ!Car
ITZ!Car
ITZ!Car ITZ!Car ITZ!Card PnP
d PnP
d PnP d PnP d PnP to the ISDN network.
3. 3.
3. 3.
3. Installation of the driver software for F FF
FFR
R
R R
RITZ!Car ITZ!Car
ITZ!Car ITZ!Car
ITZ!Card PnP d PnP
d PnP d PnP
d PnP.
With Windows 3.x it is absolutely essential to observe the sequence of
the installation steps. If you fail to follow the specified sequence,
error-free operation of FRITZ!Card PnP is not guaranteed.
1. Physically Installing FRITZ!Card PnP in the Computer
• Switch your computer off and unplug the power connector
cable.
• Loosen the screws of the computer housing and open the
computer.
• Select an appropriate slot, remove the protective plate on the
top end and insert F FF
FFR
R
R R
RITZ!Car ITZ!Car
ITZ!Car ITZ!Car
ITZ!Card PnP d PnP
d PnP d PnP
d PnP into the slot with the con-
nector strip facing forward into the slot until the card is firmly
located.
• Screw F FF
FF R
R
R R
RITZ!Car ITZ!Car
ITZ!Car ITZ!Car
ITZ!Card PnP d PnP
d PnP d PnP
d PnP tightly to the top end of the slot.
• Close the computer, tighten the screws and reconnect the
power plug.
Physical installation of F FF FF R R R R RITZ!Car ITZ!Car ITZ!Car ITZ!Car ITZ!Card PnP d PnP d PnP d PnP d PnP is now completed. The
controller must now be connected to ISDN.