AVL Industrial Dobby Loom, Руководство пользователя

Страница: 36 / 67

Using the IDL
Page | 30
Backplate Tilt
The shuttle boxes on both sides should
relative to the
shuttle race. This angle will cause the shut
race as it travels across.
If the boxes are misaligned in the opposite
an errant trajectory and may
unsafe condition.
Backplate Cant
Both shuttle box assemblies must also carry a slight angle
In the same way that a bit of downward angle causes the shuttle
the race, a slight canting of the backplates will
located against the reed as it travels across
If the backplate is angled too
of the reed and exit the loom
forward, the shuttle will speed off the race.
Shuttle Box to Race Alignment
There are two critical alignments to consider
Industrial Dobby Loom User's Manual
The shuttle boxes on both sides should carry a very slight downward angle
shuttle race. This angle will cause the shuttle to “hug” the
the boxes are misaligned in the opposite direction, the shuttle will take on
an errant trajectory and may launch off the race — obviously creating an
lies must also carry a slight angle towards the reed
the same way that a bit of downward angle causes the shuttle
the race, a slight canting of the backplates will keep the shuttle properly
located against the reed as it travels across the loom.
oo far back, it will cause the shuttle to bounce off
reed and exit the loom area. If the backplate is angled too far
forward, the shuttle will speed off the race.
Alignment
cal alignments to consider here:
l Dobby Loom User's Manual
Adjustments
slight downward angle
tle to “hug” the
direction, the shuttle will take on
obviously creating an
towards the reed.
the same way that a bit of downward angle causes the shuttle to stick to
the shuttle properly
will cause the shuttle to bounce off
If the backplate is angled too far