AVL Industrial Dobby Loom, Руководство пользователя

Страница: 17 / 67

Industrial Dobby Loom User's Manual IDL Setup
Setup Your Computer Page | 11
Over time, due to the shaking and movement the loom experiences during
use, these connections will shake loose, requiring periodic checking and
tightening. Make a check of these components a regular part of your loom
maintenance.
Flexible Air Link
If the air line from your compressor is made of a rigid material (steel pipe,
PVC, copper), we suggest that you provide a flexible link between it and the
loom. Simply connect a foot or more of ½” air hose between the FR and the
end of the compressor line. This link will dampen vibration between your
loom and the incoming air line, lessening the possibility of loosened fittings.
Floor Brackets
Your loom is equipped with special shock absorbing pads which will retard its
tendency to “walk”. In some situations, the loom may need to be anchored
to the floor. Brackets made for this purpose are available from AVL.
If you opt to bolt your loom to the floor, be sure to first check that it is
square. Bolting the loom to the floor will, over time, reduce the need to
adjust the loom for square. It will also reduce the need to make adjustments
to the flyshuttle boxes.
Power Supply
AVL strongly recommends that you use a surge protector and an
Uninterruptable Power Supply (UPS) with your loom. These will protect the
electronics in your loom from power outages and fluctuations.
Note:
If the IDL stops unexpectedly due to a power outage, check the loom
carefully for any damage before restarting. Also check the warp and the
woven cloth to make sure nothing was damaged.
S
ETUP
Y
OUR
C
OMPUTER
Your AVL technician should have installed the software for the IDL on your
computer and connected it to the Compu-Dobby.
There are several ways to connect the Compu-Dobby to the computer. The
most common is with a USB cable.
For complete information on using the software, please see the software
manual.