A V L L O O M S
AVL Looms, Incorporated
2360 Park Avenue, Chico, California 95928-8305
Phone: 530-893-4915 Fax: 530-893-1372 www.avlusa.com
Revision 4/9/14
1
E-LIFT II+ UPGRADE INSTALLATION
FOR STUDIO DOBBY LOOM (SDL)
SUPPORT AND WARRANTY
Congratulations on your purchase of an
AVL E-Lift II+
, for your
Studio Dobby
Loom
. Your new E-Lift II+ takes the work out of lifting your harnesses and is designed
to provide years of dependable service.
Your E-Lift II+ comes with a lifetime of phone and e-mail support and a standard AVL
One-Year Warranty for the original owner. For a complete warranty statement, to have
warranty service performed, or to get support, please contact AVL at 530-893-4915 or by
e-mail to [email protected].
INSTALLATION
Package Contents:
Note: If, upon your inspection of the contents of your package, all
pieces listed here are not represented, please contact AVL Looms immediately, prior to
installation. See Figure 2 for help with identification of these components and hardware.
Quantity Description
1
E-Lift II+ Motor/ Pulley Box
– Fig. 1a, 1b
1
Spring Lever Assembly
1
Spring Lever Stand-off Bushing
1
1/2"OD x 5/16"ID x 3/8" L Bushing
1
# 8350 Spring
2
SDL E-Lift II+ Mount Block
1
Cam/Cylinder Assembly
1
Cord, Motor Pulley to Cam
1
Cord, Dobby Arm to Spring Lever
4
1/2" Stop Collar
1
1/4-20 x 2-5/8" Eye Bolt
1
1/4-20 Hex Nut
1
1/4-20 Nylock Nut
2
1/4 Flat Washers
4
5/16-18 x 2 3/4" Hex Bolt
1
5/16-18 x 3-1/2" Hex Bolt
5
5/16-18 Nylock Nut
12
5/16 Flat Washer
4
5/16-18 x 2 Hex Bolt
4
5/16-18 Square Nut
4
5/16 Split Lock Washer
1
Foot Switch and Attached Cord
1
Power Cord
