AVL Looms Jacq3G, Руководство пользователя

Страница: 171 / 176

Jacq3G Loom User’s Manual Troubleshooting
Equipment Fixes Page | 163
9) Using the two small screws removed, install the new solenoid to the
Mount Bracket. Tighten until secure, but do not over tighten; it is
easy to strip the threads.
10) Align the black connector over the pins, making sure the connector
has not been flipped and there is no twist in the white wires. Be
sure the pins are aligned properly and not bent during this step.
Gently push down from the top to re-seat the connector. You might
wish to hold firm the bottom of the Module to provide enough
pressure.
11) Using the little plastic tie-downs, re-wrap the bundle of wires in
both places. This ensures the wires remain relatively flat on the
surface, to avoid interaction with the adjacent Module.
Reinstall the Module Hook
1) With the plunger and spring pinched in place on the hook, approach
the Upper Guide from underneath and reinsert the Upper Hook into
its correct space in the Upper Guide.
2) Be sure the Upper Hook is facing the same direction as the other
Upper Hooks. Once the hook is clear of the Upper Guide, find the
little hole in the solenoid and gently press the plunger, with the
newly mounted spring, into the hole. Use a finger on one hand to
apply slight pressure to the plunger in order to keep the
Plunger/Spring in place, until the hook has been stabilized in the
Middle Guide.
3) With the other hand, move the hook up until the bottom of the
hook has cleared the Middle Guide.
4) Lower the hook through its space in the Middle Guide.
5) You can now release your hold on the plunger and continue the
downward movement until the hook can be dropped into the space
on the Lower Guide and the Lower Hook will rest on the Lower Slide
Bar.
6) Reconnect the hook to the heddle with the small, black clip, taking
care to avoid any twisting in the hook or entanglement with
adjacent hooks, heddles, or springs.