Avizia AVZ-MXC-DOC-UIG-04 Скачать руководство пользователя страница 9

Страница: 9 / 16

Assembly and Installation

Display Installation | MX300

This cart has been designed
specifically for the Cisco
Telepresence MX200 or MX300
flat panel display. It is not
recommended that any other
display be used to mount on this
cart.

CAUTION:

Before attaching display to cart, set the brakes

on the back wheels by pressing down on the tabs to prevent
instability that could result in possible injury.

Remove MX200 BACK COVER BRACKET from the column
assembly (D) by removing two screws and washers.

Reuse screws and washers from Step 1 to secure the
MX300 BACK COVER BRACKET (P) to column assembly.

Use #10-24 x 1/2” Phillips pan machine screw (N) and
#10-24 wing nut (Q) to secure MX300 CLIP to column
assembly’s interface plate.

Apply Brakes

MX300 back cover bracket

MX300 CLIP

(continued on next page)

Extended Height Cart | User & Installation Guide

Содержание AVZ-MXC-DOC-UIG-04

















Результаты поиска

Содержание AVZ-MXC-DOC-UIG-04

Отзывы:

Похожие инструкции для AVZ-MXC-DOC-UIG-04

Бренды по названию

Популярные бренды

Avizia AVZ-MXC-DOC-UIG-04, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание AVZ-MXC-DOC-UIG-04

Отзывы:

Похожие инструкции для AVZ-MXC-DOC-UIG-04

Бренды по названию

Популярные бренды