background image

12

stop motor immediately. Abnormal vibration
usually indicates a mechanical problem
continued operation could lead to injury or
damage.
• No lubrication is necessary as the motor is

equipped with lifetime-lubrication bearings.

• Keep the ventilation vents of the blower

vacuum clean at all times, if possible, prevent
foreign matter from entering the vents.

• After each use, blow air through the blower

vacuum housing to ensure it is free from all
dust particles which may have built-up. Build
up of dust particles may cause the blower
vacuum to overheat and fail.

• If the enclosure of the blower vacuum requires

cleaning do not use solvents but a moist soft
cloth only. Never let any liquid get inside the
blower vacuum; never immerse any part of the
blower vacuum into liquid.
• When not in use, the blower vacuum should

be stored in a dry, frost free location not within
the reach of children.

Note

: AAVIX will not be responsible for any

damage or injuries caused by the repair of the
blower vacuum by an unauthorised person or
by mishandling of the blower vac. This tool is
designed for DIY use - use in commercial or
industrial environments will void the warranty.

TROUBLESHOOTING

Problem

Cause

Remedy

Poor Suction

Collection bag full

Empty the collection bag.

Clogged vacuum tubes

Remove any debris or built up
within the vacuum tubes.

Clogged collection bag
connector

Remove the collection bag,
remove build up of debris from
connector & outlet in the
housing.

Low speed setting

Turn up variable speed dial.

Vacuum doesn’t start

Loose locking knob or
collection bag not fully
connected.

Tighten locking knob and
ensure the collection bag is
pushed fully onto the housing.

Blower doesn’t start

Loose locking knob or suction
tube not fully connected.

Tighten locking knob and
ensure blower tubes are
pushed onto the housing fully.

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household waste but in an
environmentally friendly way. Please recycle where facilities exist. Check with your local council
authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material
decreases pollution in the environment. Please recycle packaging where facilities exist. Check with
your local council authority for recycling advice.

Содержание A11707













Отзывы: