This manual contains comprehensive information of your Avitech TACP-100 to
help you operate the device. It is divided into four chapters and three appendices.
Chapter 1,
Getting Started
, gives you an overview of the TACP as well as
identify its external components.
Chapter 2,
Avitech Control Panel
, shows you how to create the
configurations using the Avitech Control Panel (ACP) and save it to the
TACP.
Chapter 3,
Communicating With Multiviewers
, tells you how to use
TACP to communicate with Avitech Multiviewers.
Chapter 4,
TACP Modes
, lets you know the basic controls of the TACP.
Appendix A,
ASCII Z Commands
, provides you the complete lists of Z
command lines.
Appendix B,
Firmware Upgrade
, provides instructions on how to update
TACP firmware.
Appendix C,
ACP (More Information)
, provides additional information
about the ACP (Avitech Control Panel).
NOTE:
For the administrator who needs to create configuration and edit the layouts, you
may start from Chapter 2 to begin setup. However, if you are an operator who performs the
TACP controls, you may start from Chapter 3.
About this Manual
Throughout the manual, the following conventions are used to distinguish
elements of text.
NOTE:
provides additional hints or information that requires special attention.
CAUTION:
identifies important information which, if not followed, may result in loss of data
or damage to your device.
Any name of menu, command, icon or button that you can see on the screen is
shown in a bold typeset. For example:
On the
Start
menu, select
Settings
.
xi