®2002 Directed Electronics, Inc.
9
The Valet switch is a small push-button switch that allows you to
control all of the system’s programmable features and enter your
override PIN code. (See
User-Programmable Features
section of this
guide.) This switch can only be controlled in conjunction with
your ignition key.
NOTE:
Make sure the dealer has shown you where the Valet switch is
located. You will need to disarm the system with the Valet switch in the
event of a lost or stolen remote control.
While the system is in the Valet mode, you can still use your
remote control to lock and unlock the doors as well as activate any
optional accessories, such as boot release or remote engine starter.
Your Maxx2 security system incorporates two Ultrasonic sensors,
which are most commonly mounted at the top of the A-pillars fac-
ing the rear of the vehicle. These sensors detect movement inside
the vehicle by sensing air disturbance. They should trigger the
alarm if a thief gained access to the interior of your vehicle.
In the event of a lost or stolen remote control, all remote controls
can be erased from the systems memory preventing unauthorised
system operation. (See the
Programming Table for Remote Controls
section of this guide.)
Instant Remote Control Code Deletion
Ultrasonic Sensors
Keyless Entry in Valet Mode
Valet Switch
