background image

Electric Boot Release

- The accessory output of the system

can operate a factory electric release for the vehicle’s boot or

hatch. Although the on-board circuit can control some elec-

tric factory releases, an optional relay is usually required. If

the factory release is not electric-activated, Directed®'s 522T

boot release solenoid can often be added.

Electric Window Control

- Automatic electric window control

is provided with the 529T and 530T systems. These can oper-

ate electric windows, and can roll them up automatically when

the system is armed, roll them down, or both up and down. 

Glossary of Terms   

Control Unit 

- The “brain” of your system. Usually hidden under-

neath the dash area of the vehicle. The control unit houses the

microprocessor which monitors your vehicle and controls all sys-

tem functions.

Input

- A physical connection to the system. An input can be pro-

vided by a sensor, pinswitch or by existing systems in the vehicle,

such as ignition or courtesy lights.

LED

- A red light mounted at a discretionary location inside the

vehicle. It is used to indicate the status of your system. 

®2002 Directed Electronics, Inc.

29

Содержание MAXX2



































Отзывы: