28
Video Size:
set video image resolution, save and reboot to take effect (main stream default 1920 * 1080, other
options: 1280 * 720; secondary stream default 640*320, other options: 320*180, 1280*720).
Stream Rate Control:
set rate control mode, save and reboot to take effect (main/secondary stream default:
variable bit rate, other options: fixed rate).
Image Quality:
set image quality. Image quality can be changed only when rate control is set to variable bit rate
(main stream default: better; secondary stream default: good; other options: best, better, good, bad, worse, worst).
Rate (Kb/s):
set the video bit rate (main stream default: 8192Kb/s, other options: 64-20480Kb/s; secondary stream
default: 2048Kb/s, other options: 64-8192Kb/s).
Frame Rate (F/S):
set the video frame rate (main/secondary stream default: 25F/S; other options for main stream:
5-60F/S; other options for secondary stream: 5-30F/S).
Key Frame Interval:
set the key frame interval (main/secondary stream default: 75F, other options for main
stream: -300F; other options for secondary stream: 1-150F).
Key Frame Minimum QP:
default: 10, other options: 10~51.
Click "
Save
". Settings will take effect after the message "saved successfully" shows.
2) Stream Release
Switch:
to turn on/off the main/secondary stream.
Protocol:
main/secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935, other options: 0-65535).
Host Address:
server IP addresses (default 192.168.5.11).
Stream Name:
choose a different stream name (live/av0, other options: live/av1).
User:
set the user name.
Password:
set the password.
Click "
Save
". Settings will take effect after the message "saved successfully" shows.
RTSP obtaining path: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary stream).
3) Video Parameters
a. Focus: focus mode, focus range, focus sensitivity can be set.
Focus Mode: set the focus mode (default: auto, other options: manual).
Focus Range: set the focus range (default: middle, other options: upper, lower).
Focus Sensitivity: set the focus sensitivity (default: low, other options: high, medium).
b. Exposure: exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit, DRC,
shutter speed, aperture value and brightness can be set.
Exposure Mode:
set the exposure mode (default: automatic, other options: manual, shutter priority, aperture
priority, brightness priority).
Exposure Compensation:
exposure compensation setting is active when it is auto status (default: off).
Exposure Compensation Value:
set the exposure compensation value. Valid when it is set for auto (default: -7,
other options: -7 ~7).
BLC:
set back light compensation, valid when it is under auto mode (default: off).
Anti-flicker:
set anti-flicker mode, valid when under automatic, aperture or brightness priority mode (default:
50Hz, other options: closed, 60Hz).
Gain Limit:
set the gain limits. Auto, active when it is under aperture or brightness priority mode (default: 7, other
options: 0-15).
Dynamic Range:
set the dynamic range (default: 2, other options: 1-8 and OFF).
Shutter Speed:
active when it is under manual or shutter-priority mode (default: 1/90, other options: 1/90, 1/100,
1/1/120/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000).
Содержание AV-1362U
Страница 7: ...3 2 Upside down installation steps...