- 22-
Ref#92550806002
Some uses of this function would be for systems or computers that require a shut
down time
Delay after action (Seconds):
The number of seconds it takes the attached
devices to startup. Once those devices start, the Startup Action will be activated
to
continue
pinging or stop pinging.
Continue Ping:
After start up Delay has been reached the start up action will
either
Continue Pinging or Stop Pinging
Action:
When the number of Ping Failures have been reached. The device can
be set to perform a Off, On, or Reset function.
Ping Interval (Seconds):
The number of seconds between each ping
Ping Echo Wait (Milliseconds):
The number of milliseconds the device will wait
for a response from the pinged device if no ping is detected within this time it will
be considered a ping failure.
Please view the example below for more details:
In the picture above:
1.)
Power 1 Ping
function is
enabled for two websites
2.) The
9258xx
will ping the web address
www.sample.com
&
www.google.com
3.) If there is a response within the
Ping Echo Wait
the
9258xx
will send
another ping signal the set
Ping Interval
which is 3 seconds
for this
example.
4.) If the
9258xx
does not receive a response from the device it will constitute a
Ping Failures
.
5.) After 3 consecutive failure the device will go to the
Action Delay
section. In
this case the device will delay for 3 seconds.
