3. Install the vertical fin onto the fuselage. Ensure it is fully seated, and the front part of the vertical fin
is fully inserted
in
to the slot as shown. Use the supplied set of 3 x 8mm self-tap
p
ing screws to lock
the
vertical fin in place. Note: Please do this on both sides.
4. Tr
ia
l fit the stabilizer onto the fuselage and ensure it is fully seated inside the slot. If you are
satisfied with the fit apply foam safe glue to the slot and the wooden spar on the stabilizer, then
install it onto the fuselage as shown. In this meantime, repeat this step to install the stabilizer on
the other side. Ensure the stabilizer on both sides
stay
level whilst
the
glue dries.
14