Avintage AVU23SX, Инструкции по применению

Страница: 51 / 172

51
AVU23SX(/IX) AVU52SX(/IX)
1. Lower hinge (right) 2. Screws 3. Door axis
4. Door 5. Top hinge (Right) 6. Hinge screws
7. Top hinge (left) 8. Decorative nail 9. Lower hinge (left)
10. Door limit device 11. Screw 12. Plug
1.
Open the door to 90 degrees, remove the two screws (2) from the lower door axis (3), remove the
door (4) and door axis (Fig. A).
2.
Position the door (4) safely and remove the plug (12) from the top of the door frame. Unscrew one
screw (11) at the bottom and remove the door limit device (10). Install
the door limit device (10) at
the top of the door frame. Please use the spare plug (12) to block the hole at the top of the door
frame (Fig. A/B).
3.
Take out three hinge screws (6) from the upper hinge (right) (5) and remove it (Fig. C).
4.
Remove the decorative nail (8) from the top left of the cabinet and install the spare top hinge (left)
(7) on the top left of the cabinet with three screws (Fig. D).
5.
Install the spare lower hinge (left) (9) according to the above procedure (Fig. E).
6.
The door opens to 180 degrees. Install the door in the same way as it was removed and fix it so
that the door is aligned.
7.
Block the hole at the top right of the cabinet with the spare decorative nail (8).