Avintage AVI48PREMIUM, Инструкция по использованию

Страница: 47 / 173

47
1) Kitchen cabinet
2) Door part
3) Body part
4) Upper part of the wine cellar
5) Bottom part of the wine cellar
A.
Install your wine cellar into the kitchen cabinet, having first checked that the dimensions
correspond exactly to those indicated on the installation drawing.
B.
Once your wine cellar properly positioned into the kitchen cabinet, please adjust it as close as
possible to the edges of the kitchen cabinet. Make sure that your appliance is flushed with
the kitchen cabinet in order to ensure a functional push-pull opening system.
C.
Once black mounting bars are installed as close as possible to the edges of the kitchen cabinet,
test the push-pull system to open and close the door. Once the test is successful, please screw the
upper fixing bar and the lower one (2 screws at the top / 2 screws at the bottom) in order to
correctly install your wine cellar.
Improper installation of your appliance will not allow the push-pull system to function
properly to open or close the door. Make sure to follow the instructions above.
Opening and closing push-pull system
Put your hand to the opening zone and wait for a few seconds before the opening system can trigger.
This is normal that there is a delay between putting your hand to the upper left zone of your wine cellar
and the moment the door opens.
Moreover, the system is electronic; it does not require any adjustment on your side. For your
information, the system allowing the opening of the door is located inside the control panel
Before closing the door carefully,
please wait for the opening system to return
to its original position
. Forcing when closing
may damage
the push-pull
system.
PUSH-PULL system