30
REVERSING THE DOOR SWING OF YOUR APPLIANCE
Should you desire to reverse the opening direction, please follow the instructions below.
Note: All parts removed must be saved to do the reinstallation of door.
Remove the glass door by unscrewing the eight lock screws 3 and 4. Be careful to hold the glass door firmly after
removing the screws and place it on a padded surface to avoid the risk of damage.
Unscrew and transfer the door supporter 2 to the opposite side.
Rotate the glass door 180° and refit the glass door to the opposite side. Then screw and tighten it after the door is
leveled.
OPERATING YOURWINE COOLER
The Wine Cooler should be placed in a position where the ambient temperature is between 16-38°C/60~100ºF. If the
ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your
unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 5-22°C/40-72ºF may not be
reached.
Note:
When you use the Wine Cooler for the first time or restart the Wine Cooler after having been shut off for a long time, there could be
a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to
the length of the activation time. Once the Wine Cooler is running for a few hours everything will be back to normal.
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart
before this time delay, the Wine Cooler will not start.
Downloaded from www.vandenborre.be
