Avidyne Envision EXP5000, Руководство пилота

Страница: 23 / 90

EXP5000 System Overview
600-00157-000 Rev. 06 -17- Entegra EXP5000 PFD
5) Left Knob —The function of the left knob changes depending on
the enabled button.
■
When the IAS Bug is enabled, push IAS
Bug to display the IAS knob label:
◆
Push —Syncs the setting to the current airspeed. After
you push the knob, you can then rotate it to easily make
small adjustments to your heading and speed.
◆
Rotate —Changes the desired setting one number at a
time.
■
When DH Alert is enabled, push DH Alert to
display the DH Set knob label. Rotate the
knob to change the DH Alert setting. For more information,
see
Right Button and Knob Configurations , on page 20.
■
When Nav is enabled, the DTK (Direct Track) Set or Crs Set
label displays when you can set a course, as shown in Table
2.1. For information about setting a course, see Section
3.5, "Using GPS/VHF Systems with the EXP5000" on page
32.
■
When Range/View is enabled, the left knob controls the HSI
view, and if applicable, the moving map range, as follows:
Table 2.1 DTK or Crs Set Labels
NAV Source GPS Nav Condition Left Knob Label
GPS 1 or GPS 2 GPS in Auto-Leg mode None
GPS 1 or GPS 2 GPS in OBS mode
VLOC 1 or VLOC 2 Tuned NavAid is a VOR
VLOC 1 or VLOC 2 Tuned NavAid is an ILS or
LOC
Table 2.2 HSI Moving Map Range Labels
View Selection Left Knob Label
With moving map
Without moving map