Avid Technology SR2400, Руководство по установке, Страница: 71 / 90

Appendix C
Using the Product Recovery
CD-ROM
You might need to reinstall the Windows 2000 operating system on your
PortServer system if you are directed to do so by Avid Customer Support, or if
you are initializing your PortServer system from scratch. The reinstallation
offers you two options:
t
Perform a Windows 2000 installation to the entire drive (C: and D:). This
replaces all of the data from all the available partitions on your PortServer
system. You can perform this operation if you are initializing your
PortServer system.
t
Perform a Windows 2000 installation to the 1st partition (C:). This
removes the data in the C: partition only; the D: partition is not changed.
You can perform this operation to replace only the operating system on
your PortServer system.
n
This procedure restores only the Windows 2000 operating system and the
hardware drivers. It does not restore the MediaNetwork software. The
MediaNetwork software must be reinstalled separately, after the operating
system recovery is complete.
Topics in this appendix include:
• Reinstalling the Windows 2000 Operating System
• Configuring the PortServer System Using Windows 2000 Setup
• Checking the Drivers
• Updating the ATTO Driver and Phantom Device
• Reinstalling the Alacritech Driver
• Reinstalling the MediaNetwork Software