Avid Technology SR2400, Руководство по установке, Страница: 72 / 90

Appendix C Using the Product Recovery CD-ROM
72
Reinstalling the Windows 2000 Operating System
To reinstall the Windows 2000 operating system from the Avid Product
Recovery CD-ROM:
1. Make sure all clients unmount any workspaces they have mounted and
stop the Connection Manager.
2. Stop the File Manager using the Monitor Tool.
3. Locate the Avid PortServer Product Recovery CD-ROM.
4. Insert the Avid PortServer Product Recovery CD-ROM into the
PortServer CD-ROM drive.
5. Click the Start button, and select Shut Down. The Shut Down Windows
dialog box opens.
6. Select the Shut down option, and click OK. The Windows 2000 operating
system shuts down and turns off the PortServer system.
7. Disconnect all of the Ethernet network cables.
8. Press the Power button on the front of the PortServer system. The system
starts to boot normally and then presents the Avid PortServer Product
Recovery CD-ROM screen. This takes approximately 2 minutes.
9. Select one of the available options:
t
1. Perform a Windows 2000 installation to the 1st partition (C:).
t
2. Perform a Windows 2000 installation to the entire drive (C: and
D:).
t
3. Exit from the process without doing a recovery.
10. Type the number of the operation you want to perform at the prompt.
t
If you type
1
or
2
, a warning screen appears informing you that you
are about to recover the Windows 2000 operating system. Continue
with step 11.
t
If you type
3
, the recovery quits and displays the DOS prompt A:.
11. A caution screen appears informing you again that you are about to
recover the Windows 2000 operating system.
t
Press any key and continue with step 12.
t
Press Ctrl+C to quit the recovery.
12. A final caution screen appears informing you again that you are about to
recover the Windows 2000 operating system.