Avid Technology Nitris, Инструкция по использованию

Страница: 5 / 58

Site Planning
5
The Avid Nitris consists of:
• The Avid Nitris enclosure, backplane, power supply, and power cord
• A standard-definition (SD) video I/O board
• A high-definition (HD) video I/O board
• A eight-channel audio I/O board
Three audio cables are provided with the Avid Nitris; analog in, analog out, and
AES/EBU I/O. The audio cables have a DB25 connector at one end that plugs into the
Avid Nitris and the other end of the cables have eight separate XLR connectors supporting
eight channels of audio. For more information, see
“Connecting Audio” on page 40 .
The Avid Nitris is shipped with the Using the Avid Nitris CD-ROM that includes this online
document.
Site Planning
When preparing your site, you must consider the environmental, electrical, and space
requirements for your Avid Nitris workstation, as well as any additional equipment. Before
setting up your system, see the ReadMe provided with the Avid editing application to make
sure that there are no changes to the information in this document. The required expansion
boards are installed and configured for Avid Nitris. Do not remove or modify these boards.
For instructions on setting up the computer hardware, see the setup documentation provided
with the HP Workstation. For a rackmount workstation, you must install the computer into a
standard rack before connecting the hardware.
To prevent equipment damage that may be caused by static electricity, do all of the following
before making any connections:
• Turn off all devices.
• Always use anti-static prevention.
• Always connect devices to a properly grounded outlet.
• Touch the metal casing of the device before handling any circuit boards.