Avid Technology NEXIS File Gateway, Руководство по установке и эксплуатации, Страница: 46 / 57

Configuring the System Drive Using Windows 2008 Storage Server Setup
46
The reimaging takes 20 to 30 minutes.
12. A gray screen prompts you to reboot. Type R .
Configure the system drive as described in the following section. The Apply Computer Setup
message is displayed for 3 to 5 minutes.
Configuring the System Drive Using Windows 2008
Storage Server Setup
After you recover the Windows Storage Server 2008 R2 operating system, several system parameters
are set including a system Disk Check. The system restarts, and you are prompted to enter the
Windows activation key. This number is on the Windows Certificate located on the right side of the
AS3000 server top cover.
To set up the Windows operating system:
1. (If removed) Reconnect all the network Ethernet cables.
2. When the Product Key screen opens, type the Product Key from the Certificate of Authenticity
in the Product Key text box. The certificate is on the top of the AS3000 server.
c
The Product Key Authenticity is verified with Microsoft through an Internet connection. If you
do not have the Avid ISIS connected to an in-house network, phone in your Product Key and
get an Authenticity number back from Microsoft.
The Windows Storage Server 2008 R2 Setup utility starts, and the a dialog box opens showing
the License Agreement screen.
3. Select “I accept the agreement.”
4. Click Next.
The AS3000 server restarts (potentially more than once).
5. Log on as
Administrator
(default password:
is-admin
).
6. After your system restarts for the last time, customize the system and local settings. See the
Windows documentation for more information.
t
If you are outside the United States, customize the system and local settings.
t
Optionally, create a new system administrator name and password.
t
Enter your company name and organization.
t
Set the correct date and time settings.
t
Configure network workgroup and computer domain settings.
c
When the operating system is restored in the AS3000 server, a unique computer host name is
created based on the MAC ID of the system board. Each time you re-image the AS3000 server,
the same name is generated. If you had previously changed the computer host name of your
AS3000 server, reapply your computer host name.
7. Start the system and install the File Gateway software; see “Installing the File Gateway
Software” on page 25 .