Avid Technology NEXIS File Gateway, Руководство по установке и эксплуатации, Страница: 21 / 57

Network Connection
21
File Gateway Server USB and Monitor Ports
To connect a keyboard, monitor, and mouse to the File Gateway server:
1. Install your KVM switch in a suitable slot next to the File Gateway server in the rack.
You can also place the monitor on a shelf, and the keyboard and mouse on a sliding tray in the
rack. These items are optional and can be purchased locally or from Avid.
c
Do not place the monitor on top of the File Gateway server.
2. Attach the VGA connector on the monitor cable to the 15-pin video port on the back of the File
Gateway server. Secure the connector with the thumbscrews on the connector. For exact
locations see
“Network Connection” on page 21 .
3. Insert the connector on the keyboard and mouse cables into a USB splitter cable.
n
If you do not have a USB splitter cable, plug your keyboard and mouse cables directly into the USB
ports on the rear of the File Gateway server.
4. Insert the other end of the USB splitter cable into a USB connector on the back of the File
Gateway server.
Network Connection
Before you define the IP addressing for your File Gateway and configure the static internal IP
addresses, make sure you understand how the addresses are assigned within the Avid NEXIS
environment.
Connect the two (Intel Pro 1000) Ethernet ports on the right side of the File Gateway to the switch
using a CAT5 E, CAT6 cable or better.
File Gateway Server Ethernet Ports
Power supplies
Slots not used
Serial Intel Pro Ethernet ports Video USB
Power supplies
Slots not used
Serial Intel Pro Ethernet ports Video USB