![background image](http://html1.mh-extra.com/html/avid-technology/mojo-dna/mojo-dna_manual_3031310016.webp)
Using the Avid Mojo DNA
16
The optional serial adapter kit that contains the following:
•
An RS-232 to RS-422 serial adapter
•
Two serial cables; with 9-pin male connectors at both ends
To connect a single deck to your system:
1. Locate the serial adapter kit.
2. Attach one end of a 9-pin cable to the end of the serial adapter labeled
RS-232.
3. Attach the other end of the 9-pin cable to the serial port on the Avid
) or to the serial connector of the
USB-to-serial adapter.
n
When you attach the cable to the serial port on the PC, note if you are
using the COM1 or COM2 serial port. You need to select the port in the
Avid editing application.
Figure 9
Video Deck Control Cabling
4. Attach one end of another 9-pin cable to the end of the serial adapter
labeled RS-422.
5. Attach the other end of the 9-pin cable to the remote serial port of the
video deck.
n
Place the deck in Remote mode before attempting to control the deck using
the software. See the documentation provided with your deck.
To video deck
RS-422 connection
RS-232 connection
To Avid editing
system
Serial Adapter
Содержание Mojo DNA
Страница 28: ...Using the Avid Mojo DNA 28...