Using the Avid Mojo DNA
12
3. Attach two more audio cables to the Audio output connectors (see
):
a.
Connect an RCA connector to the red Audio output connector on
the Avid Mojo DNA.
b.
Connect an RCA connector to the white Audio output connector
on the Avid Mojo DNA.
4. Attach the other end of the last two audio cables (or XLR connectors)
to Audio input connectors on your deck or audio device.
Connecting S-Video or DV Signals
The S-Video and DV connectors on the rear of the Avid Mojo DNA use
industry-standard connectors. The connections are as follows:
•
There are two S-Video connectors on the rear of the Avid Mojo DNA.
One connector is for video input, and the other is for video output.
identifies the connectors.
•
The DV connector uses a 4-pin 1394 cable that carries the video and
audio input and output signals to and from your DV device. You can
also use a 4-pin to 6-pin DV cable if your DV device uses a 6-pin
connector.
identifies the connector.
Figure 5
Connecting S-Video or DV to the Deck
Host
DV
Ref
Video
Audio
Audio
Video
DC
IN
Input
Output
4-pin DV
S-Video input
S-Video output
Содержание Mojo DNA
Страница 28: ...Using the Avid Mojo DNA 28...