Avid Technology MEDIArray ZX4, Руководство по установке

Страница: 64 / 74

Appendix C Legacy, Supported MEDIArray ZX Configurations
56
Looping Two MEDIArray ZXs to One 1-Gb MEDIASwitch
Two MEDIArray ZX enclosures can connect to one port on a 1-Gb
MEDIASwitch if you loop them together using special simplex cabling.
“Looping Two MEDIArray ZXs to a 1-Gb MEDIASwitch” shows the cabling
needed to loop two MEDIArray ZX enclosures to one 1-Gb MEDIASwitch
using 3 simplex cables.
The cabling connections are:
See “Configuring
Considerations” on
page 54
for the
maximum number of
MEDIArray ZXs per
Unity system.
• Simplex Cable 1 is LC/SC and is 3 meters in length. The LC end of the
cable connects to the Transmit (top) connection of the Fibre Channel
board in MEDIArray ZX 2. The SC end of the cable connects to the
Receive (left) connection of a port in the MEDIAswitch.
• Simplex Cable 2 is LC/SC and is 3 meters in length. The LC end connects
to the Receive (bottom) connection of the Fibre Channel board in
MEDIArray ZX 1. The SC end of the cable connects to the Transmit
(right) connection of a the same port of the MEDIASwitch.
• Simplex Cable 3 is LC/LC and is .5 meters in length. One end of the cable
connects to the Transmit (top) connection of the Fibre Channel board in
MEDIArray ZX 1. The other end connects to the Receive (bottom)
connection of the Fibre Channel board in MEDIArray ZX 2.
Looping Two MEDIArray ZXs to a 1-Gb MEDIASwitch
100 RS232 Act/Col 1 2
3
4 5 6 7 8
9 10 11 12 13 14 15 16
MGMT
l
l
l
l
l
l
R T
T
R
T
R
MEDIASwitch
MEDIArray ZX 1
MEDIArray ZX 2
Cable 1
Cable 2
Cable 3
Cable 1 Cable 2
Cable 3
Detailed Connections