Avid Technology MediaDock 2 Plus, Руководство по установке и эксплуатации

Страница: 70 / 88

70
4. Loosen the two bracket nuts securing the bracket to the inside of
the chassis (see Figure 4-5 ). It is not necessary to remove the nuts.
n
Use a 5/16 extended length nut driver to loosen the two bracket nuts.
5. Slide the bracket toward the rear so that the bracket nuts are
aligned with the circular holes. Lift the bracket out of the chassis.
Figure 4-5 Bracket Removal
6. Set the jumper on the DVD writer to Master. Do not select Slave or
Cable Select. See the documentation that comes with your DVD
writer.
c
If you do not have the DVD writer set to Master, the DVD writer
will not be seen by the Avid editing system.
1 of 2 bracket nuts
Bracket
Circular holes