Step 2 (Installing the Drives):
•
Insert the 16 drives into the Engine’s drive bays. Start from the bottom of the
Engine and work your way up for better visibility during install.
•
Make sure the latch on the front of the drive is in the open position, before
insertion, by pushing the locking button on the front.
•
Repeat this step for each additional Engine.
The drive once inserted should not
move or wiggle at all. Make sure
the latch is closed and the drive is
properly seated before continuing
on to the next drive.
Insert the drives with
the latch open.
Insert the drives from
the bottom up.
5
Hardware Setup