Part 0130-#####-01 Rev. A
DRAFT VERSION
12/13/01System Requirements
a
Important Information
Avid recommends that you read all the information in these release
notes thoroughly before installing or using any new software release.
If you have an Avid AirSpace system and Avid Unity TransferManager
in your workgroup environment, you need to configure the Alteon
Web switch. Use the following procedures to configure the switch.
The Alteon 180 Web switch has a console port that allows you to view
the switch’s configuration parameters. The following instructions
describe how to connect a terminal to the console port to view the
switch settings and make any necessary changes to the settings.
These instructions include the following topics:
•
System Requirements
•
Establishing a Console Connection
•
Configuring the Alteon 180 Web Switch
System Requirements
To verify or change the configuration settings for the Alteon 180 Web
switch, you must establish a console (DCE) connection. To establish a
console connection, you must provide the following:
•
An ASCII terminal (such as your NewsCutter) or other computer
running ASCII terminal emulation software (such as
Alteon 180
™
and 180E Web Switch
Configuration Instructions
Alteon Switch.fm Page 1 Thursday, December 13, 2001 4:17 PM
