13
9
、
、
、
、
Switch both video and audio signals synchronously: [x1] B[x2].
Example: To transfer both the video and the audio signals from the input channel No.120 to the
output channel No.12,13,15. Run Command: “120B12,13,15.”
10
、
、
、
、
Inquire the input channel to the output channel [x]: Status[x].
Example: To inquire the input channel to the output channel No.23. Run Command: “Status23.”
11
、
、
、
、
Inquire the input channel to the output channels one by one: Status.
Example: To inquire the input channel to the output channels one by one. Run Command:
“Status.”
12
、
、
、
、
Save the present operation to the preset command [Y]: Save[Y].
Example: To save the present operation to the preset command No.7. Run Command: “Save7.”
13
、
、
、
、
Recall the preset command [Y]: Recall[Y].
Example: To recall the preset command No.5. Run Command: “Recall5.”
14
、
、
、
、
Clear the preset command [Y]: Clear[Y].
Example: To clear the preset command No.5. Run Command: “Clear5.”
10. Specification
Video Input
Video Output
Input
HDMI
Output
HDMI
Input Connector
HDMI 1.3
Output Connector
HDMI 1.3
Input Level
T.M.D.S. 2.9V/3.3V
Output Level
T.M.D.S. 2.9V/3.3V
Input Impedence
75
Ω
Output Impedence
75
Ω
Video General
Gain
0 dB
Bandwidth
340 MHz (10.2 Gbit/s)
Video Signal
HDMI (or DVI-D)
Maximum Pixel Clock 165MHz
Resolution Range
Up to 1920 x 1200 or
1080P@60Hz
Switching Speed
200ns (Max.)
Consumer
Electronics Control
(CEC)
Supports CEC wired infrared data pass-through using the HDMI 1.3 standard
EDID and DDC
Management
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data
using DVI and HDMI standards, EDID and DDC signals are actively buffered. The built-in
EDID/DDC database can analyze these two signals, mix them, and realize the handshake of
them internally.
