AVGear AVG-UHMS66, Руководство пользователя

Страница: 9 / 30

AVG-UHMS66
4.5 Connection with HD300R
AVG-UHMS66 boasts 6 HDBaseT output ports which support PoC solution. Connect the HDBT output ports of
AVG-UHMS66 to HDBaseT Receivers supporting PoC (like HD300R) via twisted pair. Plug a power supply to the
power port of AVG-UHMS66, the HDBaseT Receivers will be powered using the PoC solution.
5. System Operations
5.1 Front Panel Button Control
The operation examples are showed in 2.1 Front Panel. Here we make a brief introduction to the system
operations.
5.1.1 Switching I/O connection
1) To convert one input to an output:
Operation: “input”+““ENTER”
Example: input 1 to output 2
Note: In default status, the 6 IR OUT sockets correspond with 6 HDMI INPUTS. When you convert an HDMI input
to an output, the corresponding IR OUT will be switched synchronously.
2) To convert an input to several outputs:
Operation: “input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
3) To convert an input to all outputs:
Operation: “input” + “ALL” + “ENTER”
Example: Convert input 1 to all outputs
Note: Indicators of the pressed buttons will blink green for three times if the conversion is done, then it will be off.
If the conversion failed, they will be off immediately.