AVGear AVG-UHMS66, Руководство пользователя

Страница: 10 / 30

AVG-UHMS66
5.1.2 EDID Management
AVG-UHMS66 features EDID management to maintain compatibility between all devices. It can be controlled via
EDID learning and EDID invoking.
EDID Learning (from output):
One input port learns the EDID data of one output port
Operation: Press “EDID”, ““O“ENTER”.
Example: Input 2 learns EDID data from output 4
All input ports learn EDID data from one output port
Operation: Press “EDID”, “ALL”+“O“ENTER”
Example: All input ports learn EDID data from output 4
Note: Indicators of the pressed buttons will blink green for three times if the conversion is done, then it will be off.
If the conversion failed, they will be off immediately.
EDID invoking:
There are six types of embedded EDID data. The chart below illustrates the detailed information of the embedded
EDID data:
Output Button EDID Data
1 1080P 3D 2CH
2 1080P 3D Multichannel
3 1080P 2D 2CH
4 1080P 2D Multichannel
5 3840x2160 2D
（
30Hz
）
6 4096x2160 2D
（
30Hz
）
Format: Press and hold “EDID” for 3 seconds, ““O“ENTER”.
Operations:
Set EDID data for one input
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status), ““O“ENTER”.
Example: Set the EDID data of INPUT 4 to the fourth type of embedded EDID data:
Press (hold for 3 seconds) .
Set EDID data for all inputs
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status), “ALL”+“O“ENTER”.
Example: Set the EDID data of all input ports to the second type of EDID data:
Press (hold for three seconds) .
Note: If the conversion is successful, indicators of the pressed buttons will blink green for three times at normal
speed; if the conversion failed, they will blink for three times quickly.