AVG-CS4K-44
Command
Function
Feedback Example
EDIDH[x]B[y].
Input port [y] learns the EDID from output port
[x].
If the EDID data is available and the audio
section supports not only PCM mode, then
force-set it to support PCM mode only. If the
EDID data is not available, then set it as
initialized EDID data.
EDIDH[x]B[y]
EDIDPCM[x].
Set the audio section of input port [x] to PCM
format in EDID database.
EDIDPCM[x]
EDIDG[x].
Get EDID data from output [x] and display the
output port number.
Hexadecimal EDID data
and
carriage
return
character
EDIDMInit.
Restore the factory default EDID data of every
input.
EDIDMInit.
EDIDM[X]B[Y].
Manual EDID switching. Enable input[Y] to
learn the EDID data of output[X]. If the EDID
data is not available, then set it as initialized
EDID data.
EDIDM[X]B[Y]
EDIDUpgrade[x].
Upgrade EDID data via the RS232 port.
[x] is the input port, when the value of X is 9,
this will upgrade all input ports. When the
switcher receives the command, it will show a
message to prompt you to send an EDID file
(.bin file). Operations will be canceled after 10
seconds. Please disconnect all HDBaseT ports.
Please send the EDID
file
EDID/[x]/[y].
Set the EDID data of input port [x] to built-in
EDID No.[y].
[y]=1~5, correspond to the 5 embedded EDID
data separately
EDID/[x]/[y]
UpgradeIntEDID[x].
Upgrade one of the 5 embedded EDID data, x
is the serial number for the EDID data:
1. 1080P 2D 2CH
2. 1080P 3D 2CH
3. 1080P 2D Multichannel
4. 1080P 3D Multichannel
5. 3840x2160 2D (30Hz)
When the matrix receives the command, it will
show a message to send EDID file (.bin file).
Operations will be invalid after 10 seconds.
Please send the EDID
file
GetIntEDID[x].
Return the embedded EDID data selection x,
[x]=1~5
GetInPortEDID[X]
Return the EDID data of input [x], [x]=1~4
%0801.
Auto HDCP management, activate carrier
native mode
%0801
%0900.
Switch to carrier native mode.
Carrier native
%0901.
Switch to force carrier mode.
Force carrier
%0911.
Reset to factory default.
Factory Default
%9951.
Check the command sent by port 1 when
PWON.
Port 1:data when PWON
%9952.
Check the command sent by port 2 when
PWON.
Port 2:data when PWON
%9953.
Check the command sent by port 3 when
PWON.
Port 3:data when PWON
%9954.
Check the command sent by port 4 when
PWON.
Port 4:data when PWON
