![AVGear AVG-CS4K-44 Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/avgear/avg-cs4k-44/avg-cs4k-44_user-manual_3030928020.webp)
AVG-CS4K-44
Command
Function
Feedback Example
… …
IR: 04->04
Save[Y].
Save the present operation to the preset
command [Y], range is from 0 to 9.
Save To FY (Y=0-9)
Recall[Y].
Recall the preset command [Y].
Recall From FY (Y=0-9)
Clear[Y].
Clear the preset command [Y].
Clear FY (Y=0-9)
PWON.
Work in
‘normal’ mode.
PWON
PWOFF.
Enter into standby mode and cut off the power
supply to HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut off the
power supply to HDBaseT receivers, press any
button or send commands to start.)
STANDBY
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output (value: O); [X]
is the number of the port, if the value of X is
ALL, it means all ports; [Z] is for HDCP
compliant status, the value may be 1 (HDCP
compliant) or 0 (not HDCP compliant).
/%[Y]/[X]:[Z].
DigitAudioON[x].
Enable HDMI audio output of port x.
X=1, 2, 3, 4, enable this port.
X=5, enable all the 4 ports.
DigitAudio ON with [x]
DigitAudioOFF[x].
Disable HDMI audio output of port x.
X=1, 2, 3, 4, disable this port.
X=5, disable all the 4 ports.
DigitAudio OFF with [x]
/+[Y]/[X]:******.
Set communication between PC and HDBaseT
receiver.
Y is for the RS232 port (connect with
RS232 port of the HDBaseT receiver)
Y= 1~5 or A~H, The value of Y is
defined into the following meanings (for
a given baud rate based on the value
of X):
Y = 1~4, send this command to the
corresponding HDBaseT receiver to
control a far-end device.
Y = 5, send this command to all
HDBaseT receivers to control all far-
end devices.
Y = A, B, C, or D
Y = E, F, G, or H
For items c or d, send this command, it will
be saved to the matrix switcher but taken
without action to the corresponding
HDBaseT receiver.
It’s command function
will be completed synchronously when the
command PWON (for item c) or PWOFF
(for item d) is sent.
Note:
A & E are for port 1. B & F are for port 2.
C & G are for port 3. D & H are for port 4.
X is for baud rate, its value ranges from
1 to 7 (1--2400, 2--4800, 3--9600, 4--
19200, 5--38400, 6
—57600, 7--
115200)
***** is for data (max 48 Byte)
******