A V G L inkSc anner © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
3 9
9.2. Ignore Module Status Warnings
In the
Ignore module status warnings
dialog you can tick those components that
you do not want to get informed about:
By default, no component is selected in this list. It means that if any component get
to an error status, you will be informed about it immediately via:
·
system tray icon
- while all parts of
AVG LinkScanner®
are working
properly, the icon is displayed in four AVG colors; however, if an error occurs,
the icon appears with a warning yellow triangle with a red exclamation mark
·
text description of the existing problem in the
Security Status Info
section of
the
AVG LinkScanner®
main window
There might be a situation that for some reason you need to switch a component off
temporarily (
this is not recommended, you should try to keep all components
permanently on and in default configuration, but it may be happen
). In that case the
system tray icon automatically reports the component's error status. However, in this
very case we cannot talk about an actual error since you have deliberately induced it
yourself, and you are aware of the potential risk. At the same time, once being
displayed in an error state, the icon cannot actually report any possible further error
that might appear.
For this situation, within the above dialog you can select components that may be in
an error state (
or switched off
) and you do not wish to get informed about it. The
same option of
Ignore module status warnings
is also available for specific
