EZTouch I/O
Jr.
26 / 52
Programming the
EZTouch I/O
Jr.
Create a Project
This section outlines the basics of creating a project using the
EZ-PANEL-EDIT
software. Further programming information for the
EZTouch I/O
Jr. is located in the
EZ
Touch Editor
Software Manual
and the
EZ PLC Software Manual.
The
EZTouch I/
O
Jr. uses a subset of the instructions described in the manual. For a complete listing
of all RLL instructions supported by the
EZTouch I/O
Jr. please review the
Launch your EZ
Touch
Editor and select how you would like the program to link to
the
EZTouch I/O
Jr. unit. For this scenario, you can select 'Edit Program OFF-LINE.' This
will enable you to create a program without having the
EZTouch I/O
Jr. unit connected
through the serial port or the Ethernet connection.
Note
: The steps outlined below are based on the EZPanel Editor version 5.9 and
may vary slightly between versions.
1. Enter a project name (e.g. Test). Click OK.
2.
Next select
EZTouch I/O
Jr. from the drop-down list under Panel Family. Once
EZTouch I/O
Jr. is selected, the other fields will populate.
3. Choose the appropriate I/O model (22 or 28) and click OK to launch the
editing software program. The Main Project Window will then appear
showing both the PLC and Panel sides to the program. These two sections of
the program work together to create a
EZTouch I/O
project.
Содержание EZTouch I/O Jr.
