Avery Dennison TTX 450, Руководство пользователя

Страница: 8 / 33

Manual Scanner
01/03 Rev. 1.06 8
•
open the two screws shown on the pictures – the print module is fixed to the base plate
with these screws (2 out of 5)
•
remove the screws – they will be replaced by two new screws out of the assembly set of
the scanner module, length and screw head are different . There is a third screw to replace
on the next page.
•
mount the removed logo plate to the scanner module using the two fixation holes shown on
the picture below
screw 1
screw 2
screw set 1
screw set 2
logo plate hole
logo plate hole