Avery Dennison TTX 450, Руководство пользователя

Страница: 3 / 33

Manual Scanner
01/03 Rev. 1.06 3
IMPORTANT OPERATING INSTRUCTIONS
The following warning hints and precautions contained in these Operating Instructions
must be strictly observed. This will considerable contribute to the safe and expert operation
of your printer.
Warnings: Exclusively original parts and accessories available from the manufacturer are
To be used to maintain the service life of your printer. The use of parts not in
compliance with the exacting demands made by the manufacturer may result
In unnecessary sources of danger.
•
The housing of the unit must exclusively be opened by authorised technical
personal.
•
Insertion/Exchange of foil and material should be carried out only by especially
instructed personnel(Set Up Mode!)
•
On operation with open cover, fingers, hair, clothes jewellery, et. may be
caught by and get into the unit in the foil-feed section . Do not expose or operate the unit
to
moisture nor wet conditions.
•
Hazard of injury in the initialisation process and during cutting because of
moving
knife!
Attention : This unit is equipped with a Class II Laser product – do not stare into the
beam !
•
Remove printhead not until 3 minutes after disconnection of unit.
•
Re connect unit not until 10 seconds after disconnection’s.
•
Remove, insert or exchange Plug in Card not until 60 seconds after
disconnection of
unit.