12/03 Rev. 3.00-01
SERVICE MANUAL
General Service
TTX
350
11
Transformer
Demounting / mounting
1. Detach the back cover.
P
Regarding this point, see the section
"Housing".
2. Disconnect the transformer connection
cables. This includes the connections on
the mains-connection socket and on the
printed circuit board.
P
You can find details on the printed circuit
board connections in the section
"Service / Printed circuit boards".
P
The connections on the mains-
connection socket can be found in the
same section.
3. Loosen the fastening screw (2) in the
base tray (hexagon socket).
Dispenser
version:
Remove the material unwinder. Loosen
the fastening screw (3) in the printer’s
partition wall (hexagonal).
P
Regarding removal of the material
unwinder, see the section of the same
name.
4. If necessary, remove the transformer (1)
and use a new transformer.
Tools
– Hexagon socket wrench 5 mm
-- Socket wrench size 10
2
3
1
