Avery Dennison Power Stacker, Руководство пользователя

Страница: 21 / 39

User / Service Manual Power Stacker
10/06 Rev. 1.09
21
Stepper motor
The stepper motor – if mounted to the power stacker – is an assembly and can not be
removed separately (motor and threading axle).
Assembly is like described in the TDI manual (platform).
•
remove rear cover
•
remove board and carrier
•
disassemble platform mechanic
•
open lower plate
•
remove nut from thread axle
•
remove platform block
•
open motor screw (2) and remove
motor together with axle
•
clean new motor and axle with
Aceton
•
glue motor and axle together with
Loctite 648 – and assemble immediate
•
position hexagonal nut around 20 mm
from the end of the axle
•
move mechanic in vertical position and
press the threading axle down
•
the glue is ready after 30 minutes – but
the mechanic can be assembled immediate
min. 20 mm
glue with
Loctite 648
press
down