Avery Dennison M09416 XLI, Руководство по обслуживанию

Страница: 6 / 55

M09416
®
XLI
®
Thermal Direct Printer
3
Gap/Black Mark
Sensor Calibration,
Label Length
Measurement, Self-
Test
1.Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED becomes
amber and blinking.
(Any amber will do during the 5 blinks).
The LED color will be changed as following order.
Amber red (5 blinks)
amber (5 blinks) green
(5 blinks) green/amber (5 blinks) red/amber (5
blinks) solid green
It calibrates the sensor and measures the label length
and prints internal settings.
Printer
Initialization
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns
green after 5 amber
blinks. (Any green will do during the 5 blinks).
The LED color will be changed as following:
Amber red (5 blinks) amber (5 blinks)
green
(5 blinks) green/amber (5 blinks) red/amber (5
blinks) solid green
Always do gap/black mark sensor calibration after
printer initialization.
Force Black Mark
Sensor Calibration
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns
green/amber after 5
green blinks. (Any green/amber will do during the 5 blinks).
The LED color will be changed as following:
Amber red (5 blinks) amber (5 blinks) green (5
blinks)
green/amber (5 blinks) red/amber (5
blinks) solid green