Avery Dennison M09416 XLI, Руководство по обслуживанию

Страница: 5 / 55

M09416
®
XLI
®
Thermal Direct Printer
2
1.3. LED
LED Color Description
Green/ Solid This illuminates that the power is on and the device is
ready to use.
Green/ Flash This illuminates that the system is downloading data
from PC to memory and the printer is paused.
Amber This illuminates that the system is clearing data from
printer.
Red / Solid This illuminates printer head open, cutter error.
Red / Flash This illuminates a printing error, such as head open,
paper empty, paper jam, or memory error etc.
1.4 Button Operation
Feed Press the button when the LED is green .
It feeds the label to the beginning of the next label.
Pause
Press the feed button during printing.
The printing job is suspended.
Gap/Black Mark
Sensor Calibration
1.Turn off the power switch.
2. Hold on the button then turn on the power switch.
3 Release the button when LED becomes
red and blinking.
(Any red will do during the 5 blinks).
It will calibrate the gap/black mark sensor sensitivity.
The LED color will be changed as following order
：
Amber red (5 blinks) amber (5 blinks) green
(5 blinks) green/amber (5 blinks) red/amber (5
blinks) solid green
It calibrates the sensor and measures the label length.