Avery Dennison M09416 XLI, Руководство по обслуживанию, Страница: 45 / 55

M09416
®
XLI
®
Thermal Direct Printer
42
Note:
Please select gap or black mark sensor by GAP or BLINE command prior to
calibrate the sensor.
For more information about GAP and BLINE command, please refer to TSPL2
programming manual.
4.2. Gap/Black Mark Sensor Calibration; Self-test
While calibrate the gap/black mark sensor, printer will measure the label length, print
the internal configuration (self-test).
Please follow the steps as below.
1.Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED becomes
amber and blinking. (Any amber will do
during the 5 blinks).
The LED color will be changed as following order.
Amber red (5 blinks)
amber (5 blinks) green (5 blinks)
green/amber (5 blinks) red/amber (5 blinks) solid green
It calibrates the sensor and measures the label length and prints internal
settings.