Avery Dennison ALS 341, Руководство пользователя

Страница: 23 / 54

Operators Manual
ALS 341
Release 4/04 Page 19 Starting the labeller
3.7.2 Labelling speed
Set Position to the distance between start sensor and dispensing edge. If installed remove the
roller to press the label onto the product. Now try to dispense one product. If the label has
wrinkles reduce the speed with the Speed down key. If the product peels out the label, so the
stop position of the next label is different to the last position increase the speed. Normally your
dispense speed should be a little bit higher than your product speed.
3.7.3 Label position on the product
At least adjust the position of the label on the product with the position keys.