37084AA
26
To configure the NTP settings
:
1. Click to enable the NTP function.
2. Configure the following settings:
o
Server Address:
IP address of NTP server.
o
NTP Port:
Port of NTP server.
o
Interval:
The time between synchronizing actions with NTP server.
Note:
You can click the Test button to test the time synchronization function via NTP server.
To configure Manual Time Sync:
1. Enable the manual time synchronization function. (enabled by default)
2. Click the icon to select the date, time from the pop-up calendar.
Note:
Check sync with computer time to synchronize the time of the device with that of the local PC.
DST (Daylight Savings Time)
Configure daylight savings time, if needed.
To configure DST:
1. Select the
Start Time
and the
End Time
.
2. Select the DST Bias.
3. Click
Save
to activate the settings.
