avertX HD438 Скачать руководство пользователя страница 47

Страница: 47 / 51

37080AA

To configure Linkage Method for Motion Detection:

•

Check

Upload to FTP/Memory Card/NAS

to capture images and/or record video when

motion is detected and upload the output to the on-board storage.

Requires microSD card installed in camera. (Not Included)

Note:

Refer to

Storage > Schedule Settings

Storage > Storage Management

sections of

this manual to configure microSD card storage.

Storage

Schedule Settings

Record Schedule

This camera includes an integrated microSD™ card slot that can be used to record video. The card slot is

compatible with a microSD™ card up to 128GB. This section is used to define when video should be

recorded to the microSD™ card.

To configure record schedule:

1. Check

Enable

to enable scheduled recording.

2. Click

Advanced

to set the camera record parameters.

3. Select the

record type

, and click-and-drag the mouse on the time bar to set the record schedule.

4. Click

Save

to save the settings.

Pre-record:

length of time set to start recording before the scheduled time or the event. The Pre-record

time can be configured as

No Pre-record, 5s, 10s, 15s, 20s, 25s, 30s

not limited

Содержание HD438




















































Результаты поиска

Содержание HD438

Отзывы:

Бренды по названию

Популярные бренды

avertX HD438, Руководство пользователя

Результаты поиска

Содержание HD438

Отзывы:

Бренды по названию

Популярные бренды