3. Screen installation
3.1. Installation precautions
- Installation work should be carried out by a qualified technician in accordance with the instructions described below.
- Fixed installation of the screen should be done with use of the screws and anchors suitable for the walls/ceilings
materials at the installation place and the genuine installation brackets delivered with the screen.
- Check carefully after installation if the screen is perfectly leveled. Do not roll out the screen not installed in horizontal
position. In case the screen leveling is not perfect correct the installation.
3.2. Ceiling installation
- Appoint the location of the ceiling mount brackets fixing points.
- Drill holes for anchors fixing the screen brackets to the ceiling.
- Fix the ceiling brackets with anchors (see picture 1).
- Slide screen fixing bolts into the casette chanels (see Picture 2).
- Twist the screen casette and slide the chanel onto the ceiling brackets front hinge (see Picture 3).
- Twist the screen casette back to the horizontal position (see Picture 4)
- Slide locking bolts to the lock position (see Picture 4).
The mounting screws diameter should be not smaller than Ø8 mm. In case of the cartboard-plaster ceiling installation,
use cartboard-plaster dedicated steel anchors with Ø11mm diameter screws.
Picture 1 Fixing screen ceiling brackets
Picture 3 Screen ceiling installation - phase 2
Picture 2 Screen ceiling installation - phase 1
Picture 4 Screen ceiling installation - phase 3
D = (3/4W+55)±W/6
W - screen width in milimeters
Check the screen case leveling before first unrolling the screen.
Do not use the screen if it is not properly installed (leveled).
6
RF remote controller:
Triggered transmitter:
Dimensions:
Dimensions:
Power supply:
battery
Power supply:
110 x 58 x 20 mm
90 x 58 x 65 mm
1 x
12V typ 23A
AC 220V, 50Hz
min. 100mm
