Picture 9 Screen without remote control system
electric installation
Screen
bl - blue (common)
br - brown (rolling down)
yg - yellow-green (protective)
bk - black (rolling up)
Power line
L1 - brown (live)
N - blue (neutral)
G - yellow-green (protective)
bl
yg
bk
br
ATTENTION: Electric installation work should be carried out by a certified electrician.
Picture 10 Screen with built-in +RCX control
system electric installation
Picture 11 Screen with built-in triggered
control system electric installation
Screen
bl - blue (common)
br - brown (live)
yg - yellow-green (protective)
Power line
L1 - brown (live)
N - blue (neutral)
G - yellow-green (protective)
Screen
bl - blue (common)
br - brown (live)
yg - yellow-green (protective)
bk - black (manual control)
Power line
L1 - brown (live)
N - blue (neutral)
G - yellow-green (protective)
- Connect trigger signal transmitter to the wall outlet you plan to connect projector power cord.
- Apply projector power cord wall plug to the power outlet located at the trigger signal transmitter
! !!! NOTICE !!! Do not connect any any electric devices except multimedia projector to the power outlet located at the
trigger transmitter. Maximum projector power consumption 600W.
optional wall
switch
WS-
8
~
bl
yg
br
~
bk
br
yg
bl
~
Picture 12 Lower bar fine tuning
3.5. Screen programming.
Programing the length of the rolled out screen (screen bottom bar position).
- Roll up the screen until it will stop automatically in the upper position.
- Insert regulation wrench included in the screen set into the regulation slot (see picture. 6) located in the left bottom
part of the screen .
Regulation knob “2” (red) enables setting of the lower extreme position of the screen bottom bar:
„+” - means increasing the lenght of the fabrics is rolled down when the screen is rolled out,
„–” - means decreasing the length of the fabrics is rolled down when the screen is rolled out.
!!! NOTICE !!! The screen was programmed properly at the factory and there is no need to reprogram it without any
important reason. Setting of screen extreme positions was made by manufacturer.
If you need to change the screen extreme position follow the instructions described below.
