Avermedia NV 1000, Руководство пользователя

Страница: 113 / 154

AVerMedia NV1000/3000/5000 User’s Manual
111
down list.
2. Connection Settings
A. Select a Com Port where the PTZ camera connector is connected.
B. Select a Camera ID from the drop-down list.
C. Assign the Protocol. Please select your PTZ Model (refer to your
PTZ camera spec.) from the menu. Click Save to keep settings.
3. Preset Settings
A. Move the camera to the position (refer to the control panel below)
B. Choose a preset number from the drop-down list to set the
monitoring position.
C. Set up the Dwell time for the camera to stay (1~60 seconds) at
one position before rotating to the next position.
D. Determine a Preset Name for the position.
E. Click Save to keep the setting.
After you finish the above steps, repeat the same procedure to setup
another PTZ camera until you finish all PTZ cameras. Click
to finish the setting or to cancel it.
After the settings, you can start to use the PTZ controller.